The Best Bow Quivers for 2022

||

P.J. Reilly

We may earn revenue from the products available on this page and participate in affiliate programs.

The arrow quiver is one of those pieces of gear that bowhunters generally don’t think about too much. Until it’s a problem. The job of the quiver is pretty simple: carry arrows. That’s it. That’s all it does.

And often times, bowhunters simply look for the cheapest quiver they can find, or one that best matches their bow to complete a killer look. They don’t always pay attention to the working parts of the quiver that earn its keep when the heat is on.

So what do you want in a quiver? You want one that holds your arrows firmly in place, protects you from your broadheads, stays quiet, doesn’t stick out awkwardly, and, of course, looks cool.

Lancaster Archery Supply carries just about every hunting quiver on the market—certainly all the major players in the game. I get the chance to see, touch, and feel all of these quivers as they arrive in inventory, so I know them all pretty well. But in trying to find the best hunting quivers for this article, I took some extra steps to test nearly two dozen quivers.

I put arrows in the grippers and broadheads in the hoods to see how they hold. For the bow-mounted models, I mounted them on my bows to study their profiles and effect on balance, and I took shots to listen for any noise caused by vibrating parts—the coal-mine canary of bad bow quivers.

Combining that knowledge and testing, I came up with the following picks for best hunting quivers in the following categories:

• Best Overall: Redline RL-1 Carbon Quiver 6-Arrow
• Best Detachable: Conquest Talon
• Best Fixed: TightSpot Pivot 2.5 2-piece
• Best Budget: Kwikee Kwiver Lite-4
• Best Traditional: Selway Slide-On
• Best Hip: Vista Knight Hunting Quiver
• Mathews and Hoyt: Mathews Arrow Web HD, Hoyt Carbon Superlite Stretch

Best Overall: Redline RL-1 Carbon Quiver 6-Arrow

Redline

Check Price

Why It Made the Cut

It holds arrows securely. It’s quiet at the shot. It’s detachable. It balances the bow wonderfully for shooting with it attached. It’s light and holds six arrows. This quiver has it all.

Key Features

• 20 inches long, yet only weighs 9.7 ounces
• All carbon rods
• Simple, yet secure, quick disconnect
• Holds six arrows
• Low profile design
• Deep, protective hood with rubber lining and dedicated broadhead seats
• Can be adjusted so quiver top stays below top limb and arrows don’t extend beyond bottom limb

Pros

• You can slide the quiver forward or back to get it balanced on the bow
• No rattling when you carry your bow or when shooting
• Rubber arrow gripper holds shafts securely
• Long design is great for securing arrows to the bow
• Quick disconnect is fast and easy

Cons

• The dedicated seats for broadheads are great for expandables and three-blade fixed broadheads, but they’re not ideal for broadheads with two large blades.

Product Description

The Redline RL-1 Carbon Quiver is a six-arrow quiver measuring 20 inches long, but only weighing 9.7 ounces, thanks to all the carbon in its construction. There’s an identical, 3-arrow version that weighs 6.5 ounces if you want to cut even more weight. Redline is a new player in the compound accessory market, but the people behind the company have tons of experience. This quiver is a great example of the Redline goal, which is to produce quality gear at a fair price. This quiver isn’t cheap, but it’s not over-the-top expensive either.

The long design is a fairly new trend in quivers. I like it. With arrow shafts secured in grippers in the lower third and at the tip, they feel more secure than when you’re using a shorter quiver that grips them in the upper half of the shafts.

The RL-1 has great rubber broadhead seats inside the hood that work well with any expandables and with three-blade, fixed heads. As I mentioned, big two-blade fixed heads won’t sit as neatly, but they’ll still be secured.

If you want to take the quiver off when you’re up in the tree stand, there’s a simple, metal lever that you raise about 3 inches and then you slide the quiver straight back. It’s super secure and super quiet.

The features of this quiver are all great, but it vaulted to the top of my list when I put it on my Mathews V3X 33 and shot with it attached. It was whisper quiet, which is important. But what I didn’t expect was how well it allowed me to hold the bow. I was rock steady with the RL-1 on my bow with 4 arrows in the quiver. I held even steadier with it on than I did with it off. I’m sure it’s because I was able to slide the quiver straight back toward me. With a slotted mounting bracket, you can pull this quiver back toward you a good bit farther than you can basically any other quiver. So instead of it sitting parallel to the riser, it can sit parallel to the cables and string.

So the RL-1 is a well-made, lightweight, quiet quiver that holds arrows securely, and can be quickly detached, or balances the bow nicely if you choose to shoot with it on. That’s the quiver grand slam.

Best Detachable: Conquest Talon

Conquest Archery

Check Price

Why It Made the Cut

Simply put, the Conquest Talon has arguably the simplest quick-detach system on the market. It’s like a giant hair clip. Pinch two spring-loaded ends together and the quiver pops right off with one hand.

Key Features

• Unique, spring-loaded claws grip the mounting bracket
• Considered a five-arrow quiver, but it’s got two extra spots on the back side that allow storage of two more for a seven-arrow total capacity
• Rubber lining in the hood
• Grips arrow shafts in two places, and has point seats in the hood
• Comes with two sets of arrow grippers—one for standard hunting arrows and one for micro-diameter
• Rope tree-loop on the top for hanging in the stand

Pros

• The claw that you squeeze to remove the quiver is unique and ridiculously easy to maneuver
• Ridiculously lightweight
• Dual shaft grippers hold arrows still and quiet at the shot
• Adjustable up and down to get your arrows where you want them on the bow
• Holds seven arrows
• Costs under $90

Cons

• The point seats in the hood are round rubber cups, which I’m not a big fan of for holding broadheads

Product Description

The Conquest Talon is the only quiver made by Conquest Archery, which is known more for its stabilizers. It’s lightweight, at just 9 ounces, and features dual, rubber shaft grippers, which is unusual for a 13-inch quiver. But those 2 grippers—plus the point seats inside the hood—ensure your arrow isn’t going anywhere until you pull one out.

You can adjust the quiver up and down on the twin, carbon support rods, and then lock it in place so it stays put where you want it. But the main feature of this quiver is the quick disconnect. No other quiver on the market has a disconnect like the Talon.

Essentially, it’s a claw that grabs hold of the mounting block on the riser. The claws are held in place by spring-loaded arms. Squeeze those arms and the claws release the mount block. You can easily pluck this quiver off the bow with one hand in a second.

To be perfectly honest, the Conquest Talon wasn’t on my radar as I was doing my initial research for this article. I had done a video on it two years ago when it came out and hadn’t paid much attention to it since. I saw it in the Lancaster Archery Supply Pro Shop and remembered the unique, quick-disconnect.

At first glance, it seems like there’s no way the quiver claw that grabs the mounting block would have enough force to keep the quiver from rattling. But it does. And the quick disconnect operates simpler and faster than any other I tested.

Best Fixed: TightSpot Pivot 2.5 2-piece

TightSpot

Check Price

Why It Made the Cut

This two-piece, fixed-position compound quiver is genius in its design that allows it to fit just about any bow, in a variety of configurations—long, short, close to the riser, out away from it, swept back, pushed forward.

Key Features

• Broadhead hood and arrow gripper are two separate pieces that are attached individually to the bow
• Multiple included connectors fit just about any compound bow
• Pivoting rods that allow the quiver to transform so it’s always vertical, regardless of the bow
• Screw-in arrow blocks that allow the individual arrow grippers to adjust for fat or skinny arrows
• Durable, solid foam block in the hood secures fixed or mechanical broadheads
• Holds five arrows

Pros

• Can be adjusted to fit nearly all compound bows
• Once set and fitted with arrows, it’s solid
• No audible extra noise added to the bow at the shot
• Hood foam is deep and locks broadheads in place

Cons

• I couldn’t tighten the bolt enough on the lower half of my test quiver to solidly lock down that piece. Once arrows were in it, however, it didn’t move.

Product Description

The TightSpot Pivot 2.5 2-Piece Quiver is an adjustable quiver that can be permanently attached to just about any compound bow in a variety of configurations. Some bowhunters prefer quivers that are not detachable, because the quivers designed to attach and detach often are the ones prone to rattle when walking and shooting.

The top half—hood—and the bottom half—arrow gripper—of this quiver are bolted onto the riser of a bow independently. TightSpot includes multiple hardware pieces to match the varying connection points across the spectrum of compound bows on the market. Once attached to the riser, the Pivot earns its name from the adjustable rods that can be maneuvered so the quiver stands vertically on any bow. And the rods telescope so you can extend or reduce the distance between the gripper and the hood. You can also push the quiver in toward the riser to produce a slim profile, or pull it out away if you need to work around other accessories.

Screws mounted in rubber wedges between the individual arrow grippers can be driven in, or backed out, which compresses or opens the grippers to accommodate arrows of different diameters. With the wedges screwed all the way in, they’ll firmly hold 4mm shafts. Backed out, you can load 23-diameter shafts without a problem.

The soft foam that fills the hood is my favorite kind of foam for broadheads. No, it isn’t as durable as harder rubber seats in the hoods of other quivers, but it holds broadheads in place better than any other material. And as long as you seat your broadheads in the same holes in the foam every time you load your quiver, the foam will last for many years.

Best Budget: Kwikee Kwiver Lite-4

Kwikee

Check Price

Why It Made the Cut

The Kwikee Kwiver has been around for decades, and it’s virtually the same today as it was when I got my first bow more than 30 years ago. It’s functional, affordable, and it’s stood the test of time.

Key Features

• Detachable, one-piece quiver
• Deep hood with thin, solid rubber padding inside and guide holes for arrow tips
• Strong arrow gripper will hold skinny and normal diameter hunting arrows
• Can be locked in with an included bolt
• Lightweight at 8.4 ounces
• Holds four arrows

Pros

• Costs $30
• With the Ultra-Lock bolt in place, it’s super quiet
• Actic-2 arrow holder remains pliable in freezing weather
• Easily detaches without the Ultra-Lock bolt
• Even large fixed-blade broadheads are totally enclosed in the hood

Cons

• Without the Ultra-Lock bolt, it has a faint rattle
• With the bolt in place, detaching is not as fast as without it
• Arrows extend below the bottom cam

Product Description

The Kwikee Kwiver Lite-4 was going to make my list somehow because it’s one of the rare pieces of compound bow equipment that has remained virtually unchanged for more than three decades. I can think of no other piece of compound gear that hasn’t morphed over the years to change the way it functions or the way it looks. With that kind of longevity without transformation, you know The Kwikee Kwiver Lite-4 works.

This is a one-piece, detachable quiver that holds four arrows. Arrows are held about a third of the way down the shaft by the rubber Arctic 2 gripper, which doesn’t turn to rock when it’s cold outside.

The hood has a thin, solid-rubber lining with guide holes in the top to receive arrow points. Those holes combined with the gripper hold arrows pretty snugly in place.

The quick-detach bracket employed by the Kwikee Lite-4 is the same as it’s always been. There’s a metal leaf with a red plastic top that you pull back to insert the quiver. When the quiver is seated, the leaf springs back into place and the red top then holds the quiver down.

To get the quiver completely silent, you’ll need the Ultra-Lock bolt, which mounts through the center of the quiver arm and pins it to the bracket. It’s easy enough to unscrew it to detach the quiver, but it takes extra time. Without that bolt, the quiver does rattle a bit at the shot.

Where the Kwikee Lite-4 sits on the riser is both good and bad. The quiver sits kind of in the middle of the bow, while others usually sit higher. This lower position causes arrows 27 inches and longer to extend below the bottom cam on most bows, which means the nocks are constantly digging into the dirt if you rest your bow on the bottom cam. But that low position allows your bow to balance better during a shot. It doesn’t make the bow top heavy, like some other quivers.

Best Traditional: Selway Slide-On Recurve Quiver

Selway

Check Price

Why It Made the Cut

For something to be certified “trad,” it’s got to have as much attitude as it does functionality. The Selway Slide-On is a superbly-functioning traditional quiver. And it looks trad too.

Key Features

• Two-piece design
• Slides over limbs
• Hood is solid leather with thick, trad stitching
• Foam insert inside the hood is deep to receive those big traditional broadheads
• Lower, rubber gripper securely holds five arrows
• Fits recurve bows with limbs 1.5-2 inches wide

Pros

• Can be adjusted up and down on the limbs to hold arrows of any length
• The ends twist to get the orientation of both halves so they hold arrows parallel to the bow
• Easy to install
• Looks super traditional

Cons

• Not the most secure-fitting quiver

Product Description

The Selway Slide-On Recurve Quiver tells you exactly what it is in the name. It’s a two-piece quiver that slides onto recurve bows. Each half slides onto a limb.

Assembly is simple. Remove the bowstring and slide the hood over the upper limb tip and down toward the riser. Slide the arrow gripper over the lower limb tip and up toward the riser. Position the two halves anywhere to hold your arrows accordingly. The two pieces fit fairly snugly, so long as the limbs are 1.5-2 inches wide. Of course, they fit the 2-inch limbs more snugly than the 1.5-inch.

The hand-stitched leather hood is what makes this quiver so trad. It looks cool and forms the perfect container for my favorite broadhead-holding foam. Stuff a big, 135-grain Zwickey two-blade into this foam and it’s not going anywhere, nor is it cutting anyone accidentally.

With its all-rubber contact points, the Selway is nice and quiet on the bow at the shot. Even though it might be a bit loose on the limbs as compared to a bolt-on quiver, there’s nothing metal to rattle and make noise.

Having arrows in the quiver actually makes it more secure on the bow because arrows connect the halves to one another. And it holds those arrows within easy reach in case a follow-up shot is needed fast—a not-so-infrequent issue traditional bowhunters face.

Like I said. The Selway Slide-On functions great. What seals its crown as the best traditional quiver is its looks. It’s trad through and through.

Best Hip Quiver: Vista Knight

P.J. Reilly

Check Price

Why It Made the Cut

It’s one of the only hip quivers designed to hold broadheads left on the market. It’s well made, looks good and has my favorite type of broadhead foam.

Key Features

• Stunning leather construction
• Sturdy rubber arrow grippers
• Thick hood foam to secure broadheads
• Belt loop
• Intended for wearing only on the right side
• Leather thigh lashes

Pros

• Stows arrows right on your hip for quick loading into your bow
• Leather construction and foam in the hood protect you from razor-sharp broadheads
• Lashed to your thigh, the quiver moves with your leg as you stalk
• Rubber shaft grippers hold arrows securely

Cons

• Not ideal for tree stand or ground blind hunting
• Arrows are more exposed to brush while stalking and can get pried out of the quiver easier than arrows attached to a bow

Product Description

The Vista Knight Hunting Quiver is a stylish, leather quiver that holds five arrows. It’s 12 inches long by 8.5 inches across and has a loop that connects to a belt worn around your waist. It’s also got leather lashes so you can tie the bottom of the quiver to your thigh. The arrow shafts are held in place by rubber grippers at the top, while the broadhead-tipped points are buried in thick foam inside the hood.

That foam inside the hood is what separates the Vista Knight from most other hip quivers on the market. Those are designed primarily for arrows tipped with field points, and therefore intended more so for target archery than hunting. Such quivers are no good for broadheads.

Hip quivers used to be quite popular among bowhunters many years ago, but have fallen out of favor in more recent times. That’s probably why there are very few options for hunting hip quivers today. Now, you’re probably most likely to see traditional archers using such a quiver.

But they’re great for spot and stalk hunts. With the lashes tied to your thigh, this quiver moves with your body, holding arrows ready for action right on your hip, sort of like a Western six-shooter. If you have to crawl on your belly, you undo the lashes and shove the quiver around your belt to your back.

Mathews and Hoyt

Mathews and Hoyt are two bow manufacturers that have cultivated dedicated fan bases that love to fly the manufacturers’ flags. Die-hard Mathews and Hoyt owners are going to have as many Mathews and Hoyt accessories on their bows as they can get, and this includes quivers. If you’re part of this crowd and you have a Mathews V3X33, you’re just not going to put a Redline or TighSpot quiver on your bow, even though they will fit.

Fortunately for Mathews and Hoyt owners, their manufacturers both make quality quivers. We are giving them their own category because these quivers only fit the bows they’re named for. So they’re no good to owners of bows that don’t say “Mathews” or “Hoyt.” But if your bow does bear one of those names, these are the quivers for you.

Mathews Arrow Web HD Quiver

Mathews

Check Price

The Arrow Web isn’t Mathews’ latest quiver, but it is the quiver that will fit the most Mathews bows. And it’s been around for many years because it’s well-made. Available in four-arrow or six-arrow versions, the Arrow Web mounts to Mathews bows via a one-of-a-kind connection.

There’s a metal piece shaped like the letter “C” that gets bolted to a unique-shaped recess built into Mathews risers. The quiver then has two metal posts on it. The top one gets seated in a cup on the mounting bracket and the lower one pivots over a raised finger before seating into its own cup.

Now that connection keeps the quiver seated solidly. It, plus harmonic dampeners in the quiver and the mounting bracket keep this quiver ultra-quiet if you choose to shoot with it attached to the bow. But if you press down on that finger on the lower attachment point on the bracket, the quiver can quickly be detached if you like to remove it in the tree stand or ground blind.

The hood space is generous and it’s filled with a rubbery pad that broadheads sink into for nearly total encasement. The arrow grippers easily accommodate standard or micro diameter hunting arrows.

Hoyt Carbon Superlite Stretch

Hoyt

Check Price

The Carbon Superlite Stretch is another one of those long quivers, measuring 20 inches. Again, I like that length for stability holding the arrows in place. You can shoot your bow with this quiver attached, or it can quickly be detached at its two mounting points.

The unique feature of the Carbon Superlite Stretch is its adjustability. You can adjust the quiver up or down so the arrows sit on your bow the way you want. And you can also adjust it toward or away from the riser to navigate around other accessories. And if you’re using a Hoyt integrate arrow rest and the Hoyt picatinny mount for your sight, you can pull the Carbon Superlite Stretch insanely tight against the riser for an extremely low profile.

What to Consider When Buying a Quiver

Choosing a hunting quiver doesn’t need to be a long, drawn-out process. If you do your homework and know what you want, you should be able to pick one out in short order.

The process starts with deciding if you want the quiver to be detachable or not. Think how you hunt and where you hunt, and that decision should be simple. Of course, if you’re not sure, then go with detachable, because you can always simply leave that quiver attached.

Study how different quivers attach to a bow. If there’s going to be noise, this is where it’s going to start. You want the connection to be snug—immovable if possible.

If the quiver is detachable, how does the detach system work? You might be detaching and attaching in the dark, so you don’t want a quiver that requires fine motor skills to put it on or take it off your bow.

Like you’d do buying a car, look under the hood. How does a certain quiver hold arrow points? You want your points held firmly in place to keep them from rattling loose. In my opinion, hoods filled with foam/rubber are the most secure.

Check the arrow grippers. You want them to be pliable, so arrows can slip in and out easily, but you don’t want them to be flimsy, or the arrows will vibrate loose. Pliable, sturdy arrow grippers are best.

Overall, how well does the quiver hold your arrows? If you hold a quiver that locks arrows in place and one that allows them to move around, you will feel the difference.

Choose the quiver that holds the number of arrows you want to take with you on bowhunts and fits your budget, and you’re all set.

FAQs

Final Thoughts

Bowhunting quivers aren’t sexy. They aren’t meant to be sexy. You don’t usually hear bowhunters waxing poetic about how much they love their quiver. You want it to do its job and never have to think about it. Pick the right one, and that’s exactly what you’ll get.

The post The Best Bow Quivers for 2022 appeared first on Outdoor Life.

-------------------------------------

By: P.J. Reilly
Title: The Best Bow Quivers for 2022
Sourced From: www.outdoorlife.com/gear/best-bow-quivers/
Published Date: Thu, 22 Sep 2022 16:12:14 +0000